Holographic Wave Decal INSTALLATION INSTRUCTIONS
Congratulations! You have purchased America’s Best Made Vehicle Graphics. DIY Custom decals are designed and manufactured in the USA using the HIGHEST QUALITY materials available on the market. You should expect years of enjoyment without fading or deterioration of your graphics. Follow these simple instructions for Professional Results. No experience necessary!
CLEAN/PREP SURFACE
For best results the air temperature needs to be at least 50°F or 10°C Clean the installation location with soapy water or your favorite cleaner Make sure the surface is free of and dirt, debris or any other residue DRY the area. The decals are DRY INSTALLATION ONLY
PEEL
Remove the WHITE PAPER backing from the decals EASY!!
POSITION
Position the new decals over the installation location
STICK
LIGHTLY tack the decals using the top corners of the tape
Make sure positioning is correct
Gently smooth FROM THE CENTER up, down, left and right to affix the banner
DO NOT REMOVE TOP LAYER OF APPLICATION TAPE
PRESS
FIRMLY smooth the entire decal.
The adhesive is PRESSURE SENSITIVE so PRESS DOWN
Remove application tape starting in the top corners and pulling down slowly
If the decal does not release from the application tape, reposition the tape and FIRMLY press the graphic onto the surface and repeat the tape removal
Any bubbles are easily removed through “Air Channels” built into the vinyl
Use tool or finger to work any air bubbles to the edge of the decal
ADMIRE
Stand back and admire your work!
Jeep Wrangler TJ Fender Decal INSTALLATION INSTRUCTIONS
Congratulations! You have purchased America’s Best Made Vehicle Graphics. DIY Custom decals are designed and manufactured in the USA using the HIGHEST QUALITY materials available on the market. You should expect years of enjoyment without fading or deterioration of your graphics. Follow these simple instructions for Professional Results. No experience necessary!
CLEAN/PREP SURFACE
For best results the air temperature needs to be at least 50°F or 10°C
Clean the raised emblem area with soapy water or your favorite cleaner
Make sure the surface is free of remnants and residue from OEM decals
DRY the area. The decals are DRY INSTALLATION ONLY
PEEL
Remove the WHITE PAPER backing from the decals EASY!!
POSITION
Position the new decals over the existing raised “JEEP” imprint
STICK
LIGHTLY tack the decals to the fender using the top corners of the tape
Make sure positioning is correct
Gently smooth FROM THE CENTER up, down, left and right to affix the decals
DO NOT REMOVE TOP LAYER OF APPLICATION TAPE
PRESS
USE INCLUDED APPLICATION TOOL/SQUEEGEE
FIRMLY smooth the entire decal. The adhesive is PRESSURE SENSITIVE so PRESS DOWN
Remove application tape starting in the top corners and pulling down slowly
If a letter does not release from the application tape, reposition the tape with letter and FIRMLY press the letter onto the surface of the Jeep and repeat the tape removal
Any bubbles are easily removed through “Air Channels” built into the vinyl
Use tool or finger to work any air bubbles to the edge of the decal
ADMIRE
Stand back and admire your work!
Jeep Wrangler JL/Gladiator JT INSTALLATION INSTRUCTIONS
Congratulations! You have purchased America’s Best Made Vehicle Graphics. DIY Custom Fender Vent Decals are designed and manufactured in the USA using the HIGHEST QUALITY materials available on the market. You should expect years of enjoyment without fading or deterioration of your graphics. Follow these simple instructions for Professional Results. No experience necessary!
CLEAN/PREP SURFACE
For best results the air temperature needs to be at least 50°F or 10°C
Clean the surface with soapy water or your favorite cleaner
DRY the surface
DRY INSTALLATION ONLY
Make sure the surface is free of ALL dirt and debris. It will create an uneven finish
PEEL
Remove the WHITE PAPER backing from the decal EASY!!
POSITION
You can lightly drag the decal across the surface to position
Line up the curved, center section first.
Use a finger to lightly tack the center of the decal
Allow the rest of the decal to “fall” into place.
DO NOT STRETCH OR PULL
You can lift and reposition the decal repeatedly until placement is perfect!
STICK
Use the included Wrap Glove to protect the finish of the decal
Begin lightly smoothing the decal from the center outward to attach
If you find something under the decal, it's not too
late to lift, remove the debris and reapply
PRESS
The adhesive is PRESSURE SENSETIVE
FIRMLY press the entire decal FROM THE CENTER up, down, left and right
Any bubbles are easily removed through “Air Channels” built into the vinyl
Use your finger to work any air bubbles to the edge and out from under the decal
ADMIRE
Stand back and admire your work!